Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

cp243-1it ,configuring html page

Created by: mediceo2004 at: 12/22/2006 12:06 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/22/2006 12:06 PM	Rate (0)
mediceo2004 Posts: 2 Rating: (0)	I have a CP243-1 IT,i need to get some variables from web browser (remote) i tryed to use HTML CODE GENERATOR, but it lets meget just one variables from PLC (get applet);may be i can copy and paste the coderelative tothat applet,but i need ahelp; i would like to put in html pagesome push buttons (toggle function) too. Thanks a lot
mediceo2004 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

1/9/2007 8:25 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, there are differnet ways to xreate a HTML-page you need. 1. Easy way. Go to www.spidercontrol.netHere you can download a demo to "configure" Applets or Simatic IT products. The demo is fro free but limited to 8 variables. A S7-200 version of this SW is planed. Please contact this company for more information. 2. the complecated way but for free: Go to www.siemens.de/microset Select "Micro automatin examples with startup code" and download the complete information for Set 15 (Communication). Here you find information how to program applet and so on. I'm not an expert in programming JAVA so I would go the "Easy way" but this SW-Tool costs money. I hope this helps. Regards Helmut
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

1/11/2007 3:27 AM	Rate (0)
hannibar Posts: 52 Rating: (8)	Hi,mediceo2004 You can generate code use CHG,edit "box1" and copy <body> to your HTM file,but I don't think there is any "easy way" if you want it work perfectly. Best regards, Hannibar
hannibar Posts: 52 Rating: (8)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on