Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

indirect addressing

Created by: Xeren at: 10/12/2005 10:10 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/12/2005 10:10 AM	Rate (0)
Xeren Posts: 5 Rating: (0)	Hello![:)] the idea it's make the system that can be configured from SCADA it's mean that in PLC we have a program working with M Variable but which input or output address using for block ,it's will configured from SCADA, For example: In Scada we write M1:=i4.3, M2:= Q7.3..... Mx:= Qx.x ....MWx:=PWx... All that will writing in DB of course. IN PLC We have for example bloc Valve that using Mx Variable that receive or transfer the result to inputs or outputs Hope see your answer soon, best regards.Thanks for your help :)
Xeren Posts: 5 Rating: (0)
Suggestion To thank

10/12/2005 11:31 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/12/2024 Posts: 4113 Rating: (195)	Closed: cause question belong to an existing thread. New question is copied to the existing topic. Here you will find the second topic: indirect addressing in PLC siemens
	Last edited by: CS Moderator at: 10/12/2005 11:46 AM My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on