Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Unable to copy the block FB3

Created by: Ampop4 at: 7/10/2007 6:03 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/10/2007 6:03 PM	Rate (0)
Ampop4 Posts: 3 Rating: (0)	Hello, I'm configuring a CP340 with a S7-315 CPU. I follow the commissioning procedure, and when I download the blocks, it appears a message "unable to copy the block FB3". All others blocks goes to the CPU. Any idea about this issue? Thank you.
Ampop4 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

7/11/2007 8:08 PM	Rate (0)
Tomcat Posts: 433 Rating: (48)	Hello Ampop4, what is the size of your FB3 and which cpu do you use? Perhaps the FB is too big forthe used300-CPU. Tomcat
Tomcat Posts: 433 Rating: (48)
Suggestion To thank Quote Answer

7/14/2007 9:53 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	Hi, Could it be that there is a DB-number to high in number ? When it won't copy a block then it will lay a message in the diagnostic buffer !
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on