Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step7 integrated project

Created by: sandoz at: 5/16/2007 12:21 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/16/2007 12:21 PM	Rate (0)
sandoz Advanced Member Joined: 8/24/2006 Last visit: 3/20/2024 Posts: 20 Rating: (2)	Hi I am using Step7 V5.3 and Wincc v6.0sp4 as integrated project I can create the tags from DB to wincc by using S7_M_CBut I am unable to create archiving tags automatically in wincc tag logging I am getting the following error message in DB when I am trying to declare the particular DB as S7_archive=longtermI have attached the bitmap of the sameCould u plz help me outThanks & Regards sandoz Attachment simatic.JPG (282 Downloads)

Suggestion To thank Quote Answer

5/18/2007 6:40 AM	Rate (0)
decan Posts: 15 Rating: (0)	Dear sandoz there is no such optionlike s7_archieve in the properties of DB ,when u r integrating. so it is not possible.
decan Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

7/19/2007 9:23 AM	Rate (0)
thidalgo Posts: 68 Rating: (0)	I've the same problem. Then, If is not possible... what is the function of this attribute ?
thidalgo Posts: 68 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on