Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

system function SFC

Created by: cream at: 11/29/2005 3:28 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/29/2005 3:28 AM	Rate (0)
cream Posts: 3 Rating: (0)	Hello! I am using a PLC S7-400 with a micro memory card(EPROM). but i can't use SFC82 to create a data block(DB) in MMC.who can help me.I will be very pleased if you give me an example thank you very much!
cream Posts: 3 Rating: (0)	Last edited by: cream at: 11/29/2005 3:35 AM
Suggestion To thank Quote Answer

11/29/2005 12:48 PM	Rate (0)
Chris Silver Member Joined: 8/31/2005 Last visit: 10/24/2024 Posts: 217 Rating: (41)	Hi cream! The SFC 82 can not be used in an S7-400 PLC (For available SFCs in an S7-400 PLC check the instruction list: http://support.automation.siemens.com/WW/view/en/1117645, chapter "System Functions", p. 106). This is because the SFC 82 is only for use with MMC (Micro Memory Card) and these MMCs are only used in S7-300 PLCs or ET 200S.
	Last edited by: Chris at: 11/29/2005 12:50 PM Greetings, Chris
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on