Industry Online Support
Technical Forum
Navigation
Cpu 416F-2DP - How to make the software? Need I Program with the CFC?
Created by: eddyqxl at: 1/29/2008 9:50 AM (2 Replies)
Rating 
Thanks 0
3 Entries
| 1/29/2008 3:36 PM | |
Joined: 9/23/2005 Last visit: 11/13/2024 Posts: 4352 Rating:
|
Hi, 416F is a Fail Safe CPU. It is programed with STEP 7 + S7 Distributed Safety Software. I suggest you take a look at two manuals: 1 - Safety Engineering in SIMATIC S7 System Description http://support.automation.siemens.com/BR/view/en/12490443 2 - S7 Distributed Safety - Configuring and Programming http://support.automation.siemens.com/BR/view/en/22099875 |
|
Denilson Pegaia |
|
| 1/29/2008 10:38 PM | |
Joined: 9/1/2005 Last visit: 11/13/2024 Posts: 4113 Rating:
|
closed cause question posted twice. The second thread with the subject How to use CPU416F-DPis published within the conference SIMATIC S7-400 / S7-400H / S7-400F /FH. The reply of Pegaia is copied to the other thread. Best regards CS Moderator |
|
My Forum is the place to personalize your profile, |
|
Follow us on