Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLCSIM V5.4 & PCS7 V7

Created by: Tranber at: 2/1/2008 7:56 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/1/2008 7:56 AM	Rate (0)
Tranber Posts: 24 Rating: (0)	Hello, I would like to use PLCSIM V5.4 and PCS7 V7.0 in Ethernet. What type of Ethernet card I must add in my OS configuration ? General IE ? Must I create an association between my PC Ethernet Card and the General IE ? ISO or TCP/IP ? NDIS Pilote ? Thank you very much Tranber
Tranber Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

2/1/2008 7:12 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	In OS configuration IE General. Set PG/PC Interface to PLCSIM(ISO): youcan select this interface and point to the PLC ethernet card when you open PLCSIM the first time. You do not need any connection (in NetPro) between PLC and OS. See attachment. Attachment C:\PLCSIM_V7.pdf (632 Downloads)
Phantom75 Posts: 2661 Rating: (279)	Last edited by: Phantom75 at: 7/23/2013 12:06 AM
Suggestion To thank Quote Answer

2/2/2008 5:37 AM	Rate (0)
Tranber Posts: 24 Rating: (0)	Hy, I make the modifications you explain, but I also have some troubles with Station configurator. The object General IE. This component is not affected to any existing component. I've joined you a screenshot of my Station Configurator. Do you have some idea ? Thanks Tranber Attachment Simatic_Configurator.JPG (709 Downloads)
Tranber Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

2/4/2008 6:21 PM	Rate (0)
Phantom75 Posts: 2661 Rating: (279)	For using PLCSIM with Ethernet interface, you do not need to worry about station configuration editor. From your attachment, it seems that there is a configuration/download errorfor your station. You should configure and download as shown in the attachment and it should work. Attachment C:\Document1.JPG (478 Downloads)
Phantom75 Posts: 2661 Rating: (279)	Last edited by: Phantom75 at: 7/22/2013 11:59 PM Last edited by: Phantom75 at: 7/22/2013 11:56 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on