dea sir

    i have et200s cpu --- im151-8pn/dp and hsc of order no-- 6ES7 138-4DA04-0AB0

i use the software tia v-13. i want o read the enconder pulse in high speed counter. but in this software i am not found hsc . i have created hardware already and compiled it .all things are ok  but how can i select the hsc in main ob1 to read the pulse of encoder .  i also search the hsc in teachnology option of tia v13 . but i am not found the suitable hsc for this

option in techology is

   1.pid control

    2. motion control

    3. function module

    4. 300c functions

pls help me

------------------------------------------------------------------------------------------
Split from Sample Program: S7-1200 High Speed Counter (HSC).

Hi qwery,

please have a look in the Simatic ET200S Technological Function manual.

There is also an example on page 21 how to program.

https://support.industry.siemens.com/cs/de/en/view/9264111

Hope this helps,

Regards,

Towome

Hi @Towome,

I've been looking around for a while about this same matter with no success.  The guide you suggest is quite valid, I've even made it work in S7 v5.5 but I'm stuck in TIA portal v13, because of the way it handles Data blocks.

I'd like to know if I must use to different DBs for making this module work or what could I do?

Thanks.