Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Roomtemp. controll. temperature trough FB41

Created by: HansJ at: 6/19/2008 2:39 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/19/2008 2:39 PM	Rate (0)
HansJ Posts: 32 Rating: (1)	Hello Looking for some example/ tipsfor roomtemp.controll for ventilation ofa building. Anybody done that with PID reg FB41 (standardreg). PT100 for roomtempmes. PT100 for Hot watercontrol of the batteri PT100 for incoming air temp into the building. after the Hotwaterbatteri. Like to set an Setpoint tempteratur for the room. Then it should control even the outgoing watertemperatur from the batteri for preventing it from ice and a brooken Batteri. Any suggenstion or example for some kind off cascadesolution with standard PID.
HansJ Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

6/20/2008 9:07 AM	Rate (0)
SINAMICS_TO Bronze Member Joined: 4/24/2008 Last visit: 8/2/2024 Posts: 213 Rating: (16)	I think you should use the FB58, because in STEP7 you will find a sample program and also in the manual. The FB58 have also a tuning function for simple temperature process.

Suggestion To thank Quote Answer

6/23/2008 10:55 AM	Rate (0)
HansJ Posts: 32 Rating: (1)	Hi Were using FB 41 as far as possible, what's the big differens between FB41 and FB58? I rather would like to use FB41.
HansJ Posts: 32 Rating: (1)
Suggestion To thank Quote Answer

6/27/2008 12:05 PM	Rate (0)
SINAMICS_TO Bronze Member Joined: 4/24/2008 Last visit: 8/2/2024 Posts: 213 Rating: (16)	the autotuning function and controller zone. this is the bigest difference.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on