12/27/2008 7:49 AM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello J.L, Check position of jumpers . ( 7SJ62/63/64 Manual A8 V4.6 us). (page 389). Also check again profibus settings in Siprotec and PLC. (System Manual A9 SIPROTEC 4 and DIGSI ) - from page 425 regards |
Last edited by: UMENCHO at: 12/27/2008 8:00 AM |
|
12/29/2008 10:44 PM | |
Posts: 487 Rating: (44) |
Your HW configuration does not match mapping 3-1. Please see the manual belowpage 21/90 for standard mapping 3-1. http://siemens.siprotec.de/download_neu/devices/1_General/Doku_Protokolle/Englisch/Profibus%20DP/Profibus_DP_with_SM_3-1_since_3-n/com_profibus_7sj6x_6md63_us.pdf |
Follow us on