Simotion D425: When the machine starts, it goes down to fault

Have a good day EveryBody.

I am trying to resolve a similar problem with a Simotion D425. When the machine start, it go down to fault. The RDY led ( Red) and the other lights turn green. then Pass 45 min the system automaticaly go to RUN. the Diag Buffer show during the start up the next msg that i will show you:

Diag Buffer

Nr Time Date Event

126 06:57:45.739 06.08.20 Technological alarm

uw3b: Alarm 20005 : Device type:1, log. address:364 faulted. (Bit:0, encoder number:0, reason: 0x1h)

127 06:57:45.739 06.08.20 Technological alarm

uw3a: Alarm 20005 : Device type:1, log. address:344 faulted. (Bit:0, encoder number:0, reason: 0x1h)

128 06:57:45.271 06.08.20 Technological alarm

uw1b: Alarm 20005 : Device type:1, log. address:324 faulted. (Bit:0, encoder number:0, reason: 0x1h)

129 0 6:57:45.067 06.08.20 Technological alarm

uw1a: Alarm 20005 : Device type:1, log. address:304 faulted. (Bit:0, encoder number:0, reason: 0x1h)

130 06:56:54.508 06.08.20 Technological alarm

uw2b: Alarm 20005 : Device type:1, log. address:650 faulted. (Bit:0, encoder number:0, reason: 0x1h)

131 06:56:54.499 06.08.20 Technological alarm

uw2a: Alarm 20005 : Device type:1, log. address:730 faulted. (Bit:0, encoder number:0, reason: 0x1h)

66 07:08:46.883 06.08.20 Technological alarm

uw4b: Alarm 20005 : Device type:1, log. address:486 faulted. (Bit:0, encoder number:0, reason: 0xC000h)

67 07:08:46.883 06.08.20 Technological alarm

uw4a: Alarm 20005 : Device type:1, log. address:630 faulted. (Bit:0, encoder number:0, reason: 0xC001h)

68 07:08:46.874 06.08.20 Technological alarm

uw4b: Alarm 20005 : Device type:1, log. address:486 faulted. (Bit:0, encoder number:0, reason: 0x8000h)

69 07:08:46.874 06.08.20 Technological alarm

70 07:08:46.880 06.08.20 PROFIBUS DP 1: Station failure, node 4

71 07:08:46.862 06.08.20 Technological alarm

------------------------------------------------------------------------------------------
Split from Simotion D error 20005.