Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PC Access

Created by: timmer at: 5/17/2006 3:59 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/17/2006 3:59 PM	Rate (0)
timmer Posts: 1 Rating: (0)	Hello, Two months ago I installed the DEMO version of PC access, and it worked perfect. Now I purchased a single licensed version, I have removed the DEMO version. Installing isn't a problem, when I import a symbol from the PLC and press theRUN button it doesn't give an error. But when I move this symbol to the TEST client and then press "Start Test Client", I am getting the ERROR: ...an error has occurred... I hope someone can help. J. Timmermans
timmer Posts: 1 Rating: (0)	Last edited by: timmer at: 5/17/2006 6:44 PM
Suggestion To thank Quote Answer

5/19/2006 9:21 AM	Rate (0)
Green Lemon Posts: 1 Rating: (0)	Install PC Access SP2, the problem will gone. Here is the link: http://support.automation.siemens.com/WW/view/en/21897380
Green Lemon Posts: 1 Rating: (0)	Last edited by: Green Lemon at: 5/22/2006 4:40 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on