Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Factory Reset IoT2050 Advanced

Created by: dominotasi at: 2/1/2022 4:18 PM (11 Replies)

Rating (0)

Thanks 2

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

2/16/2022 12:56 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/12/2024 Posts: 3345 Rating: (379)	Hi, did you update the firmware for using the Example Image V1.2.1? Please remember that you can't use Industrial OS after updating the firmware. So depending on your goal, please think about using V1.2.1 or V1.1.1 of Example Image. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer

2/16/2022 1:50 PM	Rate (0)
dominotasi Member Joined: 10/7/2021 Last visit: 2/16/2022 Posts: 6 Rating: (0)	Hello bergmanu, yes, the problem is related with the version of Example Image, my version was special so I didn't think about the version a lot. I reset the device successfully and now I am making set-up parts. Thank you! Best regards, Merve

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bergmanu

|

Share this page:

Share this page on...

Related topics by keywords:

SIMATIC IOT2050 Industrial OS

Follow us on