Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog output 0-10V

Created by: Svetlio at: 4/6/2009 3:40 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/6/2009 3:40 PM	Rate (0)
Svetlio Posts: 2 Rating: (0)	Hello, I have the following problem. I have to masure differential temperature and control pump with frequency regulator (i must have analog output signal 0-10V). Do somebody know howi can convert differential temperature to analog output signal 0-10V? Thank you in advance,
Svetlio Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/6/2009 5:04 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	Hello Svetlio, Perhaps this could solve your problem. Look at Analogue output proportional to input. Hope this will helps. Best regards

Suggestion To thank Quote Answer

4/7/2009 8:09 AM	Rate (0)
Svetlio Posts: 2 Rating: (0)	Thank you UMENCHO. I think that will help me but first i will make some tests. Thank you again. Have a nice day. Best regards,
Svetlio Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on