Hi Pinky 

Did you solve this problem?

i have the same problem

thanks.

Pinky10

Hi Guys,

I have another very simpe problem, I cant reset the counter value to NewCountValue=0 when I trigger the SetCountValue in diagnostics of HSC technology object. Count value is retained all the time.

Note Im calling HSC every cycle.

Any Idea about the problem?

------------------------------------------------------------------------------------------
Split from HSC not properly woking in high speed.

------------------------------------------------------------------------------------------
Split from Cannot zero high speed counter.

FranCP

 Hi Pinky 

Did you solve this problem?

i have the same problem

thanks.

The expert provided very specific and helpful information. Which roadblock do you experience when implementing the provided information? Be very specific on your use case as we have yet no background to your difficulties.

Feel welcome to share a sample project and/or screen captures and/or PDF printout of what you have done up to now. Do please place multiple files into a ZIP archive file.

HI Qwazee

In the system we have a tm count 1x24v counter and some times when we want to setvaluecount for some reason this operation not works, you can see the img. and see that we active the set In and newvalue 0 but the count value never change, and there aren't errors in the block.

for it to work well we must turn off the PLC.

And I don't know why it doesn't work until we turn off the PLC. Because the manual does not specify anything clear about this problem

qwazee

 

FranCP

 Hi Pinky 

Did you solve this problem?

i have the same problem

thanks.

The expert provided very specific and helpful information. Which roadblock do you experience when implementing the provided information? Be very specific on your use case as we have yet no background to your difficulties.

Feel welcome to share a sample project and/or screen captures and/or PDF printout of what you have done up to now. Do please place multiple files into a ZIP archive file.

FranCP

HI Qwazee

In the system we have a tm count 1x24v counter and some times when we want to setvaluecount for some reason this operation not works, you can see the img. and see that we active the set In and newvalue 0 but the count value never change, and there aren't errors in the block.

for it to work well we must turn off the PLC.

And I don't know why it doesn't work until we turn off the PLC. Because the manual does not specify anything clear about this problem

qwazee

 

FranCP

 Hi Pinky 

Did you solve this problem?

i have the same problem

thanks.

The expert provided very specific and helpful information. Which roadblock do you experience when implementing the provided information? Be very specific on your use case as we have yet no background to your difficulties.

Feel welcome to share a sample project and/or screen captures and/or PDF printout of what you have done up to now. Do please place multiple files into a ZIP archive file.

 

FranCP

HI Qwazee

In the system we have a tm count 1x24v counter and some times when we want to setvaluecount for some reason this operation not works, you can see the img. and see that we active the set In and newvalue 0 but the count value never change, and there aren't errors in the block.

for it to work well we must turn off the PLC.

And I don't know why it doesn't work until we turn off the PLC. Because the manual does not specify anything clear about this problem

Hello.

Your issue is not the same as the one discussed in this topic. Which manual did you use as reference? I will ask the Moderator to split off this topic to increase visibility of your topic. Feel welcome to change the topic heading to your liking.

While you await for an expert to assist - please add an image that shows how the hardware configuration has been done for the hardware. Do make sure that the hardware configuration has been loaded properly -- the PLC will go through stop if it was done in the right way.

~

Anybody can help me? 

Thanks!