Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Acending order program in Simotion

Created by: Evaluation at: 11/18/2022 10:22 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

11/18/2022 10:22 AM	Rate (0)
Evaluation Member Joined: 7/21/2021 Last visit: 9/14/2023 Posts: 14 Rating: (0)	Hi All, I am using D425-2 DP/PN simotion. Now i have tested my ascending order program in simotion simulation but variables are not ascending correctly . but the same program working correct in s71500 simulation . here with i have attached screenshots .Pls help me solve this issue to find what's wrong or else if any one have ascending order sample program kindly share.. Thanks in adavnce.. Attachment To_Forum.zip (670 Downloads)
	Last edited by: Evaluation at: 11/21/2022 12:13:24
Suggestion To thank Quote Answer

11/21/2022 12:15 PM	Rate (0)
Evaluation Member Joined: 7/21/2021 Last visit: 9/14/2023 Posts: 14 Rating: (0)	Hi All, Any answers Pls..

Suggestion To thank Quote Answer

11/21/2022 1:20 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	Hello The program is o.k. and works even if this is not controlled with the WatchList. The cause lies in the updating of the watch list. The sorting is done by the function of the watch list and by the user program at the same time. at the same time which leads to the mix. Workaround : Application Sequential processing. E.g. extend the array by 1 field and write a certain value e.g. 55. And in the connection accordingly on 0 and 55 query around the transmission to start.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

11/21/2022 2:38 PM	Rate (0)
Evaluation Member Joined: 7/21/2021 Last visit: 9/14/2023 Posts: 14 Rating: (0)	Hi Tech team, Thanks for your reply. I have extended my array from [1..20] to [1..21] and wrote value 98 to array[21]. But still, I have the same issue when I tried to force the values from the watch table. pls, find the attached image. if you don't mind can you show us how to do sequential processing, like what you mentioned in your previous post thanks !!! Attachment To_Forum.png (565 Downloads)

Suggestion To thank Quote Answer

11/22/2022 3:49 PM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 11/8/2024 Posts: 5935 Rating: (815)	hello, please find attached screens about handle step by step which can be done via application. Attachment mechanism_watch_Prog.pdf (677 Downloads)
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Evaluation Maurobaumgarten

11/23/2022 1:41 PM	Rate (0)
Evaluation Member Joined: 7/21/2021 Last visit: 9/14/2023 Posts: 14 Rating: (0)	Hi Techteam, Thanks for your answers...

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on