Can connect Stepper motor with S7-300?

mirkoalbi

è possibile collegare direttamente un motore passo passo al plc logo in modo tale che abbia un funzionamento fluido e non a scatti?

[EN:

Is it possible to directly connect a
stepper motor to the plc logo so that it runs
smoothly and not jerkily?]

------------------------------------------------------------------------------------------
Split from Stepper motor.

You need special cards for this. But since the S7-300 has been deregistered for years, I don't think you'll still get these cards.

In the German part of the forum there are some topics.See here and here.

greeting Ella_68

Hello,

you need this:

Still available but the delivery can take some time.

Scott

Hello all,

hope I good see his post correctly, there is LOGO PLC usage probably...

Hi Duris,

the topic relates to the S7-300. I think the moderator added the quote with the LOGO, so that the user's new qustion can be better understood, because the user originally asked the S7-300 question in his LOGO topic (have a look on the edit comment from the moderator )

BR,

Noodles