Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Parameter change of Micromaster 420 VFD by S7-300 PLC

Created by: Jayden2000 at: 1/31/2023 8:30 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/31/2023 8:30 PM	Rate (0)
Jayden2000 Joined: 9/21/2022 Last visit: 3/29/2023 Posts: 1 Rating: (0)	Hi Guys, I am currently working on a project that requires the parameters of two Micromaster 420 drive's to be changed through a S7-300 PLC. If possible, this would be done through the HMI. I am struggling to find any resources that outline the actual process of programing the PKW mechanism within TIA V14. If anyone would point me in the right direction I would be greatful. The specs are. CPU 315-2 DP, 6ES7 315-2AG10-0AB0 Two Slave micromaster 420 VFD connected through Profibus-dp. TIA portal V14 Attachment Capture.PNG (664 Downloads)

Suggestion To thank Quote Answer

2/6/2023 11:49 AM	Rate (0)
Graeme Platinum Expert Joined: 6/4/2008 Last visit: 10/10/2024 Posts: 1502 Rating: (325)	Hi Jayden2000, take a look at this ENTRY, you should be able to find a use case most similar to yours to implement the asynchronous functionality. Regards, Graeme

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on