Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

read the time

Created by: manuelfina at: 3/5/2023 3:50 PM (3 Replies)

Rating (0)

Thanks 2

4 Entries

3/5/2023 3:50 PM	Rate (0)
manuelfina Member Joined: 10/28/2019 Last visit: 12/15/2023 Posts: 27 Rating: (0)	How can you read the time, from the logo on a KINCO HMI. thanks and regards Good afternoon, I tried to map those addresses and they didn't work for me, check the logo manual and they talk about other compatible addresses AND HMI devices that are VM 991 A 1002. HOUR/MINUTES: 994. SECONDS:997. MONTH/DAY:992. I did not get the day of the week and in the weekly timer it is a byte. Thanks and best regards
	Last edited by: Jen_Moderator at: 03/06/2023 10:53:57 Text formatting optimized. Last edited by: manuelfina at: 03/17/2023 15:28:04
Suggestion To thank

3/5/2023 3:56 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/9/2024 Posts: 34179 Rating: (4256)	The date and the time of the LOGO! be in the VM area as integer values. VB985 = year VB986 = month VB987 = day VB988 = hour VB989 = minute VB990 = second VB998 = day of the week (1 = sunday, 2 = monday, ....., 7 = saturday)

Suggestion To thank
This contribution was helpful to 1 thankful Users manuelfina

3/5/2023 4:05 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 11/9/2024 Posts: 34179 Rating: (4256)	You ask the same in this topic: LOGO TIME

Suggestion To thank
This contribution was helpful to 1 thankful Users Jen_Moderator

3/6/2023 10:55 AM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	Closed cause question posted twice. The second thread with the subject LOGO TIME is published within the conference LOGO! - Communication. Best regards, Jen_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on