Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

TD 200C reconfiguration

Created by: lakatosgyula at: 5/17/2006 12:58 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/17/2006 12:58 PM	Rate (0)
lakatosgyula Posts: 4 Rating: (0)	Hi all, I have made a configuration in my program for a TD 200C display, about 2 weeks ago. Since then I changed thousand things in my software, but i left the TD200C configuration alone. Now, when I want to add some other alarms in the TD200C wizard, at pressing FINISH button I get the following message: "Syster error: Comparing data for internal decisions". I have to click OK, save a backup of the currently opened code, and Step 7-Micro/Win closes itself. I tried some things: 1. Opened the project again, and delete subroutines made by the wizard. Doesn´t work. 2. I tried not to change anything in the wizard, only click FINISH without any change. Doesn´t work. 3. Deleted the symbol table, which has been created by the wizard. Same error. So I don´t find the solution, and nothing about this in the documentation of the display (and the Step7-Micro/Win help) Can anybody help me?
lakatosgyula Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

5/29/2006 8:44 AM	Rate (0)
_Marius_ Experienced Member Joined: 10/5/2005 Last visit: 4/9/2024 Posts: 63 Rating: (6)	Hi! A friend of told me nearly the same story. But I can't give you a real suggestion. Only try an another PC ... Mausus!

Suggestion To thank Quote Answer

6/7/2006 10:31 PM	Rate (0)
HDMan Posts: 5 Rating: (1)	Can you tell us which version of the software you are running, and under which OS?
HDMan Posts: 5 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on