Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MM440 dc link voltage issue f0003

Created by: AutoGen_6121236 at: 4/10/2023 6:31 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/10/2023 6:31 AM	Rate (0)
AutoGen_6121236 Joined: 4/10/2023 Last visit: 4/10/2023 Posts: 1 Rating: (0)	A MM440 I’m looking at has dc voltage on the terminals but is not showing any voltage on the dc link on the display or in r0026. Does this mean there is an internal fault on the drive or is it possible that it requires something to enable it ? The drive isn’t new but is a reconditioned one. Any help is appreciated.
	Last edited by: U_710b6c4c-4829-4792-ac43-3e1e5f30db14 at: 04/10/2023 07:08:12
Suggestion To thank Quote Answer

4/12/2023 2:41 PM	Rate (0)
Tractor Gold Member Joined: 3/27/2008 Last visit: 11/3/2024 Posts: 1144 Rating: (142)	I think the device is faulty, are there any further symptoms? Tractor
	Tractor
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on