5/3/2023 10:32 AM | |
Joined: 11/18/2022 Last visit: 5/6/2023 Posts: 19 Rating:
|
Good day, did you ever resolve your problem. I got the green LED on, and 27V on the bus. No burned fuses inside E/R module. Replaced 2x burned fuses and IGBTs inside the E/R the day before and worked all day and the problem started next morning when turning on the main switch. There was a popping sound inside electrical cabinet. I thought that LT module burned out or fuses inside E/R module but all the fuses are fine. Now there is only green LED on. 🤔 ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 05/03/2023 12:33:50New subject after splitting |
|
5/3/2023 12:35 PM | |
Joined: 6/19/2017 Last visit: 8/5/2024 Posts: 8175 Rating:
|
Closed cause question posted twice. The second thread with the subject Sinumerik 810M GA3 E/R module Green LED is published within the conference SINUMERIK CNC automation systems. Best regards, |
My Forum is the place to personalize your profile, |
|
Follow us on