6/18/2023 7:48 PM | |
Joined: 6/18/2023 Last visit: 6/18/2023 Posts: 2 Rating:
|
Hi There's something i want check about z axis When i turned off the hydraulique systeme off the machine the Z axis move forward to 0,300mm only this axis , and the others axis stay stable , but when i home the machine z axis back to 0. I just want to know if there's a problem in the brake of this axis and how to check it because the result of cmm in the part always is not good in many places of the part. The machine is cnc machine , Siemens 840 d . Thanks for reading ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 06/19/2023 11:44:22New subject after splitting |
|
6/19/2023 11:45 AM | |
Joined: 6/19/2017 Last visit: 6/28/2024 Posts: 8176 Rating:
|
Closed cause question posted twice. The second thread with the subject Result of CMM ways is published within the conference SINUMERIK CNC automation systems. Best regards, |
My Forum is the place to personalize your profile, |
|
Follow us on