10/27/2023 7:35 AM | |
Joined: 10/27/2023 Last visit: 4/23/2024 Posts: 1 Rating: (0) |
I also have a problem with the machine. when I turn on the machine and want to find the reference point y. it does that command but doesn't reset it on my screen and doesn't show that it happened. it also happens that it won't let me start and turn on the hydraulics. in both cases the alarm1121 y stillstandssueberwachung is output. I thought it was the encoder so I got a new one but the problem remained the same. ------------------------------------------------------------------------------------------ |
Last edited by: Jen_Moderator at: 10/27/2023 10:52:01New subject after splitting Last edited by: Jen_Moderator at: 11/02/2023 04:53:05Headline edited. |
|
11/2/2023 10:19 PM | |
Joined: 10/17/2007 Last visit: 7/14/2024 Posts: 4008 Rating: (351)
|
Hi Friend I hope you are coming back—answer please what is your CNC system? and details story of your machine history——-it’s a new one or you bought a used, it worked good yesterday and the problem happened today
|
If you like my comments please |
|
Follow us on