Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

810D loading backup

Created by: clarity at: 4/22/2010 12:22 PM (8 Replies)

Rating (1)

Thanks 3

9 Entries

4/22/2010 12:22 PM	Rate (0)
clarity Posts: 15 Rating: (0)	Hi all sorry my first post is a question but I have a query I would like to solve hopefully with your help. We have a Hardinge Bridgeport Machining Centre with the 810D Control. Over the past few weeks the software has become increasingly "buggy" resetting itself etc. We have spoken to technical support and they have reccomended a backup, now we have the backup disc the service engineer made when he installed the machine what I dont have is the knowledge to do it. Basically is there a step by step guide somewhere to using the backup? I understand from searching I cant use the USB or ethernet ports and it would seem I need some software also? Anybody who can point me in the right direction the help would be greatly appreciated.
clarity Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

4/22/2010 1:46 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello... Its your 810D is with MMC100.2/PCU20 or with MMC103/PCU50 if it is MMC100.2/PCU20 ==>NC/PLC backup is loaded through PCIN/WINPCIN. if it is MMC103/PCU50==> If backup is present in the Harddisk (NC/PLC) it can be loaded through the HMI screen itself. i.e Menu select>Service>etc key[>] > Read startup archive( select the backup NC/PLC ) > start Check out.... rgds / rpk89
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

4/22/2010 2:31 PM	Rate (0)
clarity Posts: 15 Rating: (0)	Hi rpk89 Thanks for your reply We have the PCU20 so looks like I will need PCIN/WINPCIN Where can I get this software from as I have been through the pack we had with the machine and all I found was a manual CDROM. Best regards Craig
clarity Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

4/23/2010 9:23 AM	Rate (0)
clarity Posts: 15 Rating: (0)	Right then I now have the software thanks to the guys at Hardinge and have ordered a USB to RS232 lead from eBAY . I have the settngs to make the software and machine talk to each other BAUD rate etc, all I need now is instructions on how to perform the backup.
clarity Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

4/23/2010 9:38 AM	Rate (1)
Ekalavya Posts: 2964 Rating: (484)	clarity Right then I now have the software thanks to the guys at Hardinge and have ordered a USB to RS232 lead from eBAY . I have the settngs to make the software and machine talk to each other BAUD rate etc, all I need now is instructions on how to perform the backup. Hello... I am attaching you the procedure for data transfering(upload/download) check this out...hope this will be useful. rgds/rpk89 Attachment Data Loading_810D_840D.pdf (1546 Downloads)
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users VENKATESH

4/23/2010 9:44 AM	Rate (0)
clarity Posts: 15 Rating: (0)	rpk89 clarity Right then I now have the software thanks to the guys at Hardinge and have ordered a USB to RS232 lead from eBAY . I have the settngs to make the software and machine talk to each other BAUD rate etc, all I need now is instructions on how to perform the backup. Hello... I am attaching you the procedure for data transfering(upload/download) check this out...hope this will be useful. rgds/rpk89 Brilliant exactly what I was looking for to transfer Backup data would that come under Start up data? Thanks for your help
clarity Posts: 15 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ekalavya

4/23/2010 10:01 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hi... It will not come under startup. Press Menu select on your operator panel.In that you need to select SERVICE. rgds/rpk89
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

11/19/2023 1:24 PM	Rate (0)
hafiz_raheem Joined: 11/19/2023 Last visit: 10/9/2024 Posts: 3 Rating: (0)	Hi, Can you send me the software. Thanks

Suggestion To thank Quote Answer

11/20/2023 11:21 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 11/11/2024 Posts: 4072 Rating: (357)	Do you think the user from 13 years ago will response you? They got sw from their machine builder, winpcin is not free try to contact your machine builder or Google search to see your luck! After trying if you have no results, pm me hafiz_raheem Hi, Can you send me the software. Thanks
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Jen_Moderator

|

Share this page:

Share this page on...

Follow us on