How can I find rack and slot number for uploading S7-400 station ... upload (13:4298)

The panel:

I have a S7-400 PLC stations with additional 2 rack rack 0 is S7-400 - rack 1 is ET200 and rack 2 is S7-200 all connect with main S7-400 CPU 

Uploading to PG/PC :

I can communicate with MPI + DP + PN and see the entire program and that's no problem,

but I can't upload the H/W configuration or entire software.

software :

I use TIA portal 15.1

and also SIMATIC manager 5.6

the issue :

because the number of the rack and slot of the module could not be determined online.

upload (13:4298)

attachment included .

Hello,

We need to know the part number of your CPU.

CPU 412-5H PN/DP

412-5HK06-0AB0

V 6.0.4

Hello Sir,

Have you got the solution ?

If yes please let me know how you solved it.

I am facing this issue whenever I try to take an upload from s7 400 plc

"Because the number of the rack and the slot of the module could not be determined online"

Please refer attached image

How can I find rack and slot number for uploading S7-400 station ... upload (13:4298). while I uploading the program from s7-400 .(simatic 5.6) this error has come.how  to solve it.

prasenjit.

abdulsh29

I am facing this issue whenever I try to take an upload from s7 400 plc

"Because the number of the rack and the slot of the module could not be determined online"

Please refer attached image

 Please how did you resolve this error...??

Hi 

the best way is check the actual module configuration. the PLC always in rack 0 / 1, then just check the slot of plc back plane.

Hi,

You can physically look at the rack and tell which slot the cpu is in.

The first slot is no 1.

This is normally where the power supply is. It can be one or two slots wide depending on the type of power supply.

Normally the cpu comes next, so this will be slot 2 or 3, but the cpu can also be in other slots.

I hope this helps.