Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Diagnostic screens of the ProAgent

Created by: AusPFN at: 2/28/2024 11:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/28/2024 11:08 AM	Rate (0)
AusPFN Joined: 10/10/2022 Last visit: 9/23/2024 Posts: 7 Rating: (0)	Dear all, I would like to ask any support to find out the right place for the download of the Diagnostic displays like ZP_* for Simatic WinCC flexible 2008 SP2. Next topic is : "activate this mode in S7-PDIAG (menu selection "Extras" > "Settings" > "Translate" " because I'm not able to see Extras in S7-DIAG screen, sorry. Many thanks

Suggestion To thank Quote Answer

3/6/2024 1:09 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/8/2024 Posts: 14127 Rating: (1769)	Hello AusPFN check the documentation for the Proagent Option: https://support.industry.siemens.com/cs/ww/en/view/34594937 https://support.industry.siemens.com/cs/ww/en/view/12139354 Bye Murof
	Last edited by: Murof at: 03/06/2024 13:09:42 If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on