Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Recableado de señales

Created by: pailo at: 6/22/2006 4:57 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/22/2006 4:57 PM	Rate (0)
pailo Posts: 1 Rating: (0)	Hola, tengo un problema con unas señales que llegan del campo al plc, que se quemaron, y necesito agregar unas estaciones remotas et200m, y al agregarlas necesito sustituir las direcciones viejas por las nuevas y no se como hacerlo si alguien me puede ayudar por favor...........
pailo Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

6/23/2006 10:46 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/25/2024 Posts: 4109 Rating: (195)	Hello pailo, this is an english forum. Please write your question in the english language. Most of our experts can't read and write spanish. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

6/26/2006 12:53 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello pailo, if you want to replace your old DP Slave modules by newer ones you may have to replace the configuration. In this case you need the latest GSD Files for these Slaves. You will have toadd these files to your configuration software and than you have to configure theses Slaves with the used I/O to this system. As I do not know the used HW I can not tell you which GSD you need but you will find the suitable GSD file in the Product Support. This should solve your problem. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on