PLC  - CPU-319
Ocorreu um desligamento de energia e após ser religado a energia notei que alguns temporizadores usados no programa do plc estava em looping, tive que usar um jumper de memoria nas linhas dos temporizadores e fazer um modify para estabilizar o temporizador, não gerou falha no equipamento e no sofware.
Gostaria de saber o que pode ter causado esse looping e o que posso fazer para que não venha ocorrer mais.

Please try to discuss your question in English language. This is an international community and we try to focus on one language. Posting in English will help to generate more replies to your question.

This is the translation of your post (via google translate):

adison_jorge de camargo154

 PLC - CPU-319
A power outage occurred and after the power was turned back on I noticed that some timers used in the PLC program were in a loop. I had to use a memory jumper on the timer lines and make a modification to stabilize the timer. It did not cause any failure in the equipment or software.
I would like to know what could have caused this looping and what I can do to prevent it from happening again.

Kind regards, Moderator_Lan

Hello,

Did any errors appear in the cpu diagnostic buffer?

Thanks you