Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

sinumerik 820t communication

Created by: sun367 at: 6/30/2006 9:41 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/30/2006 9:41 AM	Rate (0)
sun367 Posts: 20 Rating: (0)	Goodday to all, System: Cpu-SINUMERIK 820 ga2/ga3 operating panel-sinumerik 820 t plc programme -step5 Problem Currently im using S5 cables 9pin to 15pin, but this sinumerik i have to use 9pin to 25pin. Please help me by giving me the cable pin out for Step 5 programming cables. Thank you in advanced. Best Regards, sun367[:)]
sun367 Posts: 20 Rating: (0)
Suggestion To thank

6/30/2006 11:13 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/25/2024 Posts: 4109 Rating: (195)	Closed: cause thread was posted multiple. The other thread you can find here: sinumerk 820t.
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on