Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Automation License Manager stops at startup of the PG

Created by: Rosegarden at: 8/14/2009 11:02 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/14/2009 11:02 AM	Rate (0)
Rosegarden Posts: 63 Rating: (0)	Hello, I have encounterd some problem with the Automation License Manager program. After I start up de PG, de service 'Automation License Manger Service' is started only once. Directly after startup of the PG the service is stopped. This means I only can startup the Simatic package once at startup the PG. After I closed the Simatic package and start it up again it says the License Manager is running. PG Windows XP prof+SP3, Simatic Manager V5.4 Things I done I uninstalled the ALM programand deleted the ALMDB.MDB and reinstalled the ALM (v4.0+SP4SP2) after restart the PG I still have the same problem. Btw, all licenses are installed correctly on the PG. Things I going to do I'm going to uninstall the Simatic Manager (S7 package), restart the PG en reinstal the Simatic Manager, afetr that I'll try to reinstal the ALM again and see if this will fix the problem. Questions 1.Is there a other way to make the ALM work properly? 2.Will it be recommend to transfer the license onto the yellow disk first, before de-instal the Simatic Manager, becauseof the license which might (don't know for sure) will bedeinstalled along the deinstal of Simatic Manager. Thanks for any help. Rosegarden
Rosegarden Posts: 63 Rating: (0)
Suggestion To thank

8/14/2009 11:04 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the thread with the subject Automation License manger stops after starting. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on