Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siwarex M and S7-300

Created by: Rudimar at: 9/3/2009 10:10 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/3/2009 10:10 PM	Rate (0)
Rudimar Posts: 1 Rating: (0)	i have one Siwarex M and on CPU315-2DP. I connect the load cell and with the Siwatool software i can see the value of the load cell. But when i download the blocks with the example that i get from Siemens i can't see the value of any gross, net value. the value is always the same. So the question is how i can to do the siwarex module work with function blocks from S7?
Rudimar Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/4/2009 4:08 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 11/13/2024 Posts: 1147 Rating: (175)	Hello Rudimar, Can you send to that forum your Step7-program? So I can take a look into it. Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on