Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siwarex MS pinout(connector pin description)?

Created by: Yaaavar at: 8/4/2006 2:20 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/4/2006 2:20 PM	Rate (0)
Yaaavar Posts: 10 Rating: (0)	Hello I can not find SIWAREX MS step7-200 module connector pinouts in its manual,please help me to find it,do you have a link or pdf file? I do not know how to wiring it. Regards
Yaaavar Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

8/4/2006 2:30 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 11/6/2024 Posts: 8768 Rating: (1170)	Hi Yaaavar, Here is a link to manual: http://support.automation.siemens.com/WW/view/en/22600601 par. 4.4 is about wiring. Hope this helps. Best regards, Wizard

Suggestion To thank Quote Answer

8/4/2006 3:08 PM	Rate (0)
Yaaavar Posts: 10 Rating: (0)	I read that manual carefully,but there is no clear pin name in the manual ,for example see figure 4-1 or fig 4-2 you can not find any pin numbering-labels on screw terminal,if anyone have the pin labels on siwarex MS ,please upload it here.
Yaaavar Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

8/5/2006 7:59 AM	Rate (0)
Yaaavar Posts: 10 Rating: (0)	Can anyone from siemens support team help me?[:o] Please give the pinout /labels of siwarex MS screw terminals! I buy modules but I can not find any info on this. I read manual but there is no info.[:cry:]
Yaaavar Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on