Navigation

FUS060 unltrasonic flowmeter

Created by: Ocean at: 3/1/2010 5:51 AM (3 Replies)

3/1/2010 5:51 AM	Rate (0)
Ocean Posts: 2 Rating: (0)	I just wanted to know if you can get replacement connectors for the singal convertor end of the flowmeter cable? If you can what are they called and where can they be purchased? Im in Victoria Australia. Thanks
Ocean Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

Joined: 3/21/2006

Last visit: 11/1/2024

Posts: 10229

Rating:

(1181)

Hello,

Look at

There you will find all type available spare parts. And of course you should contact with Siemens office in your place. This is

Industrial Automation&Control - Customer Care Center SERVICE & SUPPORT,

Siemens Ltd., Melbourne Head Office -General Inquiries
885 Mountain Highway
Bayswater, VIC 3153 / Melbourne

Telephone:	1 300 369 515
Fax:	+61 3 9721 2922

Hope this will helps.

Best regards,
Hristo Mihalev

3/4/2010 10:51 PM	Rate (0)
Ocean Posts: 2 Rating: (0)	Hi Hristo, Thanks for the reply. The info has helped a little bit. The infomation we really need is about the connector on the co-axial cable itself? What size is it? etc Have spoken to Siemens, and they haven't really been helpful. You'd think they'd know a bit more about their own product. Any other information would be greatly appreciated.
Ocean Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/22/2010 7:27 AM	Rate (0)
Chook Experienced Member Joined: 6/13/2006 Last visit: 9/21/2023 Posts: 201 Rating: (8)	Ocean Hi Hristo, Thanks for the reply. The info has helped a little bit. The infomation we really need is about the connector on the co-axial cable itself? What size is it? etc Have spoken to Siemens, and they haven't really been helpful. You'd think they'd know a bit more about their own product. Any other information would be greatly appreciated. Hello Hristo, if the connection board (connect to theRF transducer's cable)has been damaged then you have to return thetransmitter to Siemensservice centre based in Bayswater for repair. You can't buy this individualconnectorat Siemens for your own repair. Australia -Service Hotline: 1300 369 515 Please ring this number and ask for a repair form to return the unitfor repair regards, chook
	[IMG]http://i17.tinypic.com/66b7jas.jpg[/IMG]
Suggestion To thank Quote Answer

Share this page:

Share this page on...