Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how i Simulate KTP 1000 with real CPU1214C

Created by: rumbaa at: 4/21/2010 10:21 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/21/2010 10:21 AM	Rate (0)
rumbaa Posts: 2 Rating: (0)	how i SimulateKTP 1000with real CPU1214C?
rumbaa Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

4/22/2010 12:49 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/4/2024 Posts: 4351 Rating: (1451)	Hi, I couldn't open your link. Is it correct?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/23/2010 7:56 PM	Rate (0)
rumbaa Posts: 2 Rating: (0)	Step 7 Basic includes a WinCC flexible 2008 Runtime. With this, you can simulate the Panel on your PC. To do this, you have to adjust your PG/PC interface in system settings of your PC. Configure the access point S7ONLINE with TCP/IP Network adapter of your PC. Then click to your HMI in Step7 Basic projekt and start the runtime by clicking on the green arrow symbol bar on top. All is OK
rumbaa Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on