Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

simatic net configuration console autostart

Created by: how come at: 10/5/2006 4:39 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/5/2006 4:39 AM	Rate (0)
how come Posts: 382 Rating: (47)	i have added an .EXE file into the simatic net configuration console autostart feature. However, it does not start up after the station configurator finish execution. What could be the possible reasons?
how come Posts: 382 Rating: (47)
Suggestion To thank Quote Answer

10/5/2006 9:52 AM	Rate (0)
JRennert Advanced Member Joined: 4/3/2007 Last visit: 9/10/2024 Posts: 35 Rating: (5)	Hi, do you use SIMATIC NET Edition 2005? If yes please contact the technical support, there is a hotfix available which will fix this issue. kind regards joerg

Suggestion To thank Quote Answer

10/6/2006 4:43 AM	Rate (0)
how come Posts: 382 Rating: (47)	Hi Jorg, thanks for answering my question. Actually the CD that i have install already come with HF1. The CD name is simatic net networking for industry pc/software edition 2005 + HF1. Thanks! with regards how come
how come Posts: 382 Rating: (47)
Suggestion To thank Quote Answer

10/6/2006 10:07 AM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, you are right for the latest Version of Edition 2005 but nevertheless please contact the SIMATIC Customer Support. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on