10/18/2010 9:04 AM | |
Joined: 4/24/2006 Last visit: 8/21/2024 Posts: 8719 Rating:
|
Dear yahyaevil, Here is a link to manual OP3: Operator Panel OP3 See chapter 14. The OP3 should be in Transfer mode. Best regards, Wizard |
10/28/2010 7:46 PM | |
Joined: 3/21/2006 Last visit: 7/26/2024 Posts: 10228 Rating:
|
Hello, At least you could try. Let us know for the results. Best regards, Hristo Mihalev |
Follow us on