Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

comunication S7 with CP5611 A2

Created by: Ing. Charles López at: 11/29/2006 12:51 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/29/2006 12:51 AM	Rate (0)
Ing. Charles López Posts: 2 Rating: (0)	i want to comunication from s7 5.3 to cpu 315- 2p, i have a card CP5611 A2 but in the catalog don´t exist
Ing. Charles López Posts: 2 Rating: (0)
Suggestion To thank

11/29/2006 8:29 AM	Rate (0)
Chris Silver Member Joined: 8/31/2005 Last visit: 10/24/2024 Posts: 217 Rating: (41)	Hi! What exactly do you want to do? Just downloading S7 programs to your PLC? For this task you don't need to have a PC station with the CP 5611 A2 in your project. Just set the PG/PC interface for the access point "S7ONLINE" to the interface "CP5611(MPI or PROFIBUS)".
	Greetings, Chris
Suggestion To thank

11/29/2006 9:41 AM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 10/24/2024 Posts: 414 Rating: (28)	[quote user="Ing. Charles López"]i want to comunication from s7 5.3 to cpu 315- 2p, i have a card CP5611 A2 but in the catalog don´t exist Hi, Which "catalog" do you mean?
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank

11/29/2006 10:34 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 10/25/2024 Posts: 4109 Rating: (195)	Closed: cause thread was posted twice. The other thread you can find here: I need the drive CP 5611 A2 into Step 7 for comuincation or I need comunication WinCC Flexible Rumtime PC to CPU 312 2DP.
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on