Navigation

Counter

Created by: santy at: 7/28/2011 2:39 PM (1 Replies)

7/28/2011 2:39 PM	Rate (0)
santy Experienced Member Joined: 3/4/2006 Last visit: 10/4/2024 Posts: 36 Rating: (0)	Dear Support: We have a S7-1200 CPU 1214C. They program HSC1 as incremental counter. the application is: We have a chain that runs 14 meters in one direction and another. encoder is attached to the shaft of a geared motor again. .- We have a HSC1 fast counter that counts OK a one direction but in the opposite direction your account is incorrect. Please indicate any procedure for this topic.

Suggestion To thank

7/28/2011 5:58 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	Thread closed, because question is already discussed in the following thread S7-1200 and encoder.. Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank