Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

please can you tell me how to use TONR?

Created by: tamer sobhy at: 11/28/2011 9:10 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

11/28/2011 9:10 PM	Rate (0)
tamer sobhy Posts: 23 Rating: (0)	please can you tell me how to use TONR(FC80) ?? i used it as indicated in help ducument but i download the program system fault lamp illuminate and what is DELTA_T and what is mean " ob_prev_cyclec
tamer sobhy Posts: 23 Rating: (0)	Last edited by: O_Moderator at: 11/29/2011 9:32 AM new subject after splitting from /tf/WW/en/Posts/50236#top
Suggestion To thank Quote Answer

11/29/2011 1:05 PM	Rate (0)
FreakOnALeash Posts: 267 Rating: (24)	Hello! Can you tell me where you get the two parameters "delta_T" and "ob..."? Please post a screenshot of the diagnostic buffer. Thanks!
FreakOnALeash Posts: 267 Rating: (24)
Suggestion To thank Quote Answer

11/29/2011 1:14 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Its about the TONR_X function i guess ? In what ob you call this function? hope a cylic one if not , plc stop is the result. You have to move the previous cycle time of the OB in the Delta_T tag (see attached picture where to find that in the OB Regards, Marcjan Attachment previous cycle.JPG (1025 Downloads)
	Last edited by: Marcjan at: 11/29/2011 2:03 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bosandzeros

11/29/2011 5:12 PM	Rate (0)
tamer sobhy Posts: 23 Rating: (0)	thank you
tamer sobhy Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on