Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CYCLE TIME VARIATION

Created by: rawlins at: 2/25/2012 7:09 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/25/2012 7:09 AM	Rate (0)
rawlins Posts: 10 Rating: (0)	HELLO, how do we vary the cycle time of PTO in S7 1200. I am using S7 1214C DC/DC/DC cpu.is there any sample program. plz help. regards rawl
rawlins Posts: 10 Rating: (0)
Suggestion To thank Quote Answer

2/25/2012 6:38 PM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 11/6/2024 Posts: 1523 Rating: (229)	rawlins HELLO, how do we vary the cycle time of PTO in S7 1200. I am using S7 1214C DC/DC/DC cpu.is there any sample program. plz help. regards rawl Hello rawl, Below is the excerpt from the System Manual "Pulse output parameters are assigned exclusively in the device configuration and not using the "CTRL_PWM" instruction. Any change of parameters that is intended to have an effect on the CPU must therefore be made while the CPU is in STOP mode." CTRL_PWM: Pulse-width modulation
	Like it? Rate it!
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on