Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

RS Flip Flop Functionality Is Different In S7-300 and S7-200?

Created by: soju at: 4/20/2012 8:10 AM (3 Replies)

Rating (3)

Thanks 2

4 Entries

4/20/2012 8:10 AM	Rate (1)
soju Posts: 69 Rating: (2)	Small Question... Is there any difference between the functionality of RS Flip Flop in S7-300, S7 200 and S7-1200.... Thanks In Advance, Soju Sonny Mathew
soju Posts: 69 Rating: (2)
Suggestion To thank Quote Answer

4/20/2012 8:22 AM	Rate (1)
Ayman Elotaify Platinum Member Joined: 5/28/2008 Last visit: 11/4/2024 Posts: 4516 Rating: (839)	A quick answer, No. there are no differences.
	Ayman Elotaify
Suggestion To thank Quote Answer

4/20/2012 8:26 AM	Rate (1)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	[quote user="soju"]Small Question... Is there any difference between the functionality of RS Flip Flop in S7-300, S7 200 and S7-1200.... Thanks In Advance, Soju Sonny Mathew Hello soju, If we forget about the graphical presentation,I can point out possibility of set or re-set a number of bits from starting bit(in a instruction) in S7200.This also presents in S71200 ("Set bit field").As far as I checked, this is not possible in STEP7 for S7300-S7400 by an instruction. Hope this helps Best regards, Hamid Hosseini
	Last edited by: hdhosseini at: 4/20/2012 8:31 AM Demo Channel on Youtube
Suggestion To thank Quote Answer

4/20/2012 8:58 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Setting (or Resetting) a number of bits is only for the separate S and R instructions in the S7-200. The SR and RS function can only handle 1 bit. See attachment. Regards, Marcjan Attachment setreset.JPG (392 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users hdhosseini soju

|

Share this page:

Share this page on...

Follow us on