7/9/2012 2:27 PM | |
Posts: 7 Rating:
|
Hi. I try to upload op17 to pg. When it connect it give PROTOCOL error 0003. Using Pro Save with 6e65734-2bf00 cable What does it mean. Thanks |
7/9/2012 2:35 PM | |
Joined: 4/24/2006 Last visit: 8/21/2024 Posts: 8719 Rating:
|
Hello, Could you give the MLFB number of OP17 (6AV3......) Best regards, Wizard |
7/9/2012 2:51 PM | |
Posts: 7 Rating:
|
6av3617-1jc20-0ax2 |
Last edited by: R Cerva at: 7/9/2012 2:52 PM |
|
7/9/2012 3:01 PM | |
Joined: 4/24/2006 Last visit: 8/21/2024 Posts: 8719 Rating:
|
Hello, That OP17 does not have a TTY-port. So you can not use the mentioned cable. You need 6XV1 440-2KH32. Here you will find pins What connecting cables are there for connections between the operator panels and the different controllers? 6XV1 440-2KH32: http://cache.automation.siemens.com/dnl/zc/zc5MjI2MDMA_29034071_FAQ/Panels_Anschlussleitungen_Kabelbelegung_06_e.gif Best regards, Wizard |
7/9/2012 3:41 PM | |
Posts: 7 Rating:
|
thanks |
7/9/2012 3:49 PM | |
Posts: 7 Rating:
|
10. Special connections - MS Active Sync Zero modem cable for communication between MS Active Sync and MP 270 and MP 370 Must i make this cable? |
7/9/2012 3:56 PM | |
Joined: 4/24/2006 Last visit: 8/21/2024 Posts: 8719 Rating:
|
Hi, You should make this cable: http://cache.automation.siemens.com/dnl/zc/zc5MjI2MDMA_29034071_FAQ/Panels_Anschlussleitungen_Kabelbelegung_06_e.gif Best regards, Wizard |
7/9/2012 4:00 PM | |
Posts: 7 Rating:
|
OK. Thanks for the help. |
Follow us on