Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

WinAC RTX on VMWare

Created by: Hgg at: 8/13/2012 7:14 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/13/2012 7:14 PM	Rate (0)
Hgg Posts: 17 Rating: (0)	How can I configure WinAC on Step 7 TIA Portal to use on VMWare? I have both instaled in the same VMWare. Thanks.
Hgg Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

8/16/2012 12:04 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/12/2024 Posts: 4352 Rating: (1452)	Hi, If you use differents PC to have S7 and WinAC, the answer it should be to use Ethernet network. At the same PC there is, at this moment, no way like "PC internal" to be used. In this case, the Download could be done just by archive. Alternativelly you could install S7 in a different VM and use a virtual Ethernet connection.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on