Navigation

same MLFB no. with different Version no. CPUs

Created by: Anil Belkery at: 5/7/2007 11:51 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/7/2007 11:51 AM	Rate (0)
Anil Belkery Posts: 52 Rating: (0)	Dear all, Iamfacing a problem while establishing a Redundancy between two 417-4 DP CPU of same MLFB no.but with different Version no.( Ver. 4.0.4 and Ver. 4.0.7).Canthese two CPUs be used in redundant configuration? and if YES what Isthewayoutto usethem in this configuration? Regards, Anil
Anil Belkery Posts: 52 Rating: (0)
Suggestion To thank Quote Answer

5/7/2007 3:46 PM	Rate (0)
Aret Posts: 2348 Rating: (264)	Actually you MUST use CPUs with same firmware. To implement FW update you have to upgrade to latest version both CPUs. Also you needPGandFlash card of proper size to make update.
Aret Posts: 2348 Rating: (264)
Suggestion To thank Quote Answer

5/14/2007 5:39 AM	Rate (0)
Anil Belkery Posts: 52 Rating: (0)	Thanks Aret.....
Anil Belkery Posts: 52 Rating: (0)
Suggestion To thank Quote Answer

5/15/2007 10:47 PM

Rate (0)

Late

Platinum Expert

Joined: 1/7/2006

Last visit: 11/17/2023

Posts: 2705

Rating:

(318)

Hi Anil,

Please consider to update both CPU's to Firmware Version V4.0.9

See the link for more instructions:

Operating System Updates for CPU414-4H / CPU417-4H

I hope that the answer will help, if you have still questions, don't hesitate to ask me.

All the best, Late
Never say never, think in solutions, not in trouble......

Share this page:

Share this page on...

Created by: Anil Belkery at: 5/7/2007 11:51 AM (3 Replies)

Rating (0) Thanks 0

4 Entries

4 Entries

All about SIMATIC S7-400 / S7-400H / S7-400F /FH

Follow us on

Rating (0)

Thanks 0