Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S5 CP with S7 CPU using IM463-2

Created by: MKD at: 5/21/2007 3:18 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/21/2007 3:18 PM	Rate (0)
MKD Member Joined: 4/9/2007 Last visit: 2/27/2009 Posts: 10 Rating: (0)	Dear All, Can I use any S5 CP in S5 expansion rack when it is connected to S7-400 CPU through IM463-2. If yes please suggest me the document where I will get the details. Regards, Modak

Suggestion To thank Quote Answer

5/21/2007 6:00 PM	Rate (0)
Denilson Pegaia Platinum Member Joined: 9/23/2005 Last visit: 11/4/2024 Posts: 4351 Rating: (1451)	MKD Dear All, Can I use any S5 CP in S5 expansion rack when it is connected to S7-400 CPU through IM463-2. If yes please suggest me the document where I will get the details. Regards, Modak Hi, sorry, but I don't think that is possible. A list of the released Modules can be found in the ST70 Catalog (www.siemens.com/simatic/printmaterial), pg5/115.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

5/21/2007 10:40 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	MKD Can I use any S5 CP in S5 expansion rack when it is connected to S7-400 CPU through IM463-2. Dear Modak, That is not possible, the CPs are working with Interafaces in a special dual port RAM of the SIMATIC S5. Only IPs and WF cards that are working on IO-base could be put in a special casing directly into the S7-400 rack directly, but as far as I know this casings where only in the early beginning when this kind of cards where not there for the S7-400 where used, So only I/O might be used and then is not all I/O given free (read tested), so when you use for example very old U-perifery cards, then you on youre own when somethinggoes wrong.. As sayed by our Brazilian friend, you can read in the document which I/Ois tested.
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on