Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MM440 message in P0002 : " Drive starting (Vdc precharching) "

Created by: DEYAI at: 10/2/2007 8:30 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/2/2007 8:30 AM	Rate (0)
DEYAI Posts: 1 Rating: (0)	i am mechanical engineer in the municipal company of water and waste water treatment of the city of ierapetra ( DEYAI ) at crete of greece. first of all sory for my english we have 8 Micromaster 440 drives and we have the following problem : in one of them after a power supply failure we observe a non proper operation. Connecting to one who operate corectly we upload the set of the parameter via the Drive Monitor software and follwing we download that set to the drive who dint foperate correctly. All this operation with the Dive Monitor gone well and no fault message was genarate by the software, that mean the parameter set was succesfuly transfered to the drive. After that we start the drive and we recevied the following message in the parameter P002 : "Drive is starting (Vdc precharching)" and the leds of the drive panel was flashing and the drive do not start. In the drive monitor software no fault or errors is reporting The represantative of the Siemens company in Grecce did not know nothing about this problem and we did not see anything in the device manuals please help us if u know something about thanks in advance
DEYAI Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/4/2007 3:33 PM	Rate (0)
mmf80 Advanced Member Joined: 5/4/2007 Last visit: 10/15/2007 Posts: 51 Rating: (1)	which value you read at r 26 ?

Suggestion To thank Quote Answer

10/4/2007 3:35 PM	Rate (0)
mmf80 Advanced Member Joined: 5/4/2007 Last visit: 10/15/2007 Posts: 51 Rating: (1)	which value you read at r 26, r 200, P 201 and r 947.0...7 ?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on