Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

problem to connect et 200s

Created by: Martin212 at: 7/2/2014 10:02 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/2/2014 10:02 PM	Rate (0)
Martin212 Posts: 24 Rating: (0)	so it's the first time i've to work with theS7 and i cant figure out why i can't insert my ET200S to my HW config. i made a rack for my cpu 315F-2 DP but i want to install the ET200SP because it's where all my I/O will be
Martin212 Posts: 24 Rating: (0)
Suggestion To thank Quote Answer

7/3/2014 8:04 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	Hello, To answer the question we need to know some more details. Perhaps you can attach a screenshot. Attached you find one of a working configuration. Regards, Marcjan Attachment dp-slave.JPG (118 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

7/3/2014 2:53 PM	Rate (0)
Martin212 Posts: 24 Rating: (0)	thanks for the help but i cant find the right ET200SP IM155-6DP and his DI/DO card need to have 16 input/outputX 24 DC (6ES7132-6BH00-0BA0) (6ES7131-6BH00-0BA0) And, my communication is by profinet. i made my own research and the only configuration i saw about the ET200SP i want is on the TIA V11-12. so does it mean that i can't set it in the simatic manager s7??? after i did my update of my catalogue, i still don't have my ET200SP. Do simatic manager support this one
Martin212 Posts: 24 Rating: (0)	Last edited by: Martin212 at: 7/3/2014 4:57 PM Last edited by: Martin212 at: 7/3/2014 3:27 PM Last edited by: Martin212 at: 7/3/2014 3:25 PM
Suggestion To thank Quote Answer

7/3/2014 6:38 PM	Rate (0)
VVago Posts: 784 Rating: (52)	Hello, Pulling and plugging ET 200SP I/O modules is possible • as of STEP7 V5.5 SP3 HSP 242 Best regards........
VVago Posts: 784 Rating: (52)	Last edited by: Wago at: 7/3/2014 6:39 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on