Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Password Level on Protool MP370

Created by: PLC LOVER at: 11/21/2007 9:34 AM (5 Replies)

Rating (1)

Thanks 0

6 Entries

11/21/2007 9:34 AM	Rate (0)
PLC LOVER Posts: 23 Rating: (0)	Hi, Good afternoon, I just want to ask if somebody can help me regarding different password level on Protool MP370? I already used the supervisor password 9 but i need to have different level of protection for different level of people who is using it. Can somebody please help me here. Thank you very much in advance. Warm regards, Rey
PLC LOVER Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

11/21/2007 11:33 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/1/2024 Posts: 8759 Rating: (1170)	Hi PLC Lover, Please have a look at the following manual: http://support.automation.siemens.com/WW/view/en/6909030 chapter 5.17 Best regards, Wizard

Suggestion To thank Quote Answer

11/22/2007 4:14 AM	Rate (0)
PLC LOVER Posts: 23 Rating: (0)	Hi Wizard, Thank you for your help, but I still have confused because it don't tell anything about how to make certain level of password for let say level 5 I want to put a password of reymond and also how to modify users on the program. Thank you very much in advance. Warm regards, Rey
PLC LOVER Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

11/22/2007 9:56 AM	Rate (1)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/1/2024 Posts: 8759 Rating: (1170)	Hi PLC Lover, You will have to insert another Screen. In this screen you insert a Password list. Download it into panel. Then you see on panel all users with there password, with level lower than the one that's logged in. So when you log in as supervisor, you see all users and you can make new users with password and level. Hope this will help Best regards, Wizard

Suggestion To thank Quote Answer

11/23/2007 9:43 AM	Rate (0)
PLC LOVER Posts: 23 Rating: (0)	Hi Wizard, Thank you for the help, now it's working. Once again thank you very much. Warm regards, REy
PLC LOVER Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

11/23/2007 10:01 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/1/2024 Posts: 8759 Rating: (1170)	Hi Rey, You are welcome I'm glad the problem is solved. Best regards, Wizard

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on