Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

db error

Created by: azrael at: 11/28/2007 7:22 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

11/28/2007 7:22 AM	Rate (0)
azrael Posts: 45 Rating: (4)	hi, can anyone please tell me what does this message means. >>DB error no.21 (45,59) is it looking for DB45 and 59? sorry, m not good with protool.
azrael Posts: 45 Rating: (4)
Suggestion To thank Quote Answer

11/28/2007 9:03 AM	Rate (0)
Aranel Calafalas Posts: 220 Rating: (14)	azrael hi, can anyone please tell me what does this message means. >>DB error no.21 (45,59) is it looking for DB45 and 59? sorry, m not good with protool. It means the panel has an tagadress DB45:DW59 and this is not found in plc. The format from this message is (DB-No, min Lenght required)
Aranel Calafalas Posts: 220 Rating: (14)
Suggestion To thank Quote Answer

11/29/2007 5:15 AM	Rate (0)
azrael Posts: 45 Rating: (4)	i see..thanks i have checked the op program but it has no DB45 on the tag list nor in the area pointers? where could this tag possibly located?
azrael Posts: 45 Rating: (4)	Last edited by: azrael at: 29.11.2007 05:27
Suggestion To thank Quote Answer

11/29/2007 5:13 PM	Rate (0)
Aranel Calafalas Posts: 220 Rating: (14)	Ups azrael my error. DB No 21 is missing from Byte 45 with a length of 59 Bytes. Means you have an Tag with DB21.DW45, either in length of 30 Words or there are other Tags right after the first with single-word-lenght. The Error-Number should be 545 or 546?
Aranel Calafalas Posts: 220 Rating: (14)	Last edited by: Aranel Calafalas at: 29.11.2007 17:13
Suggestion To thank Quote Answer

12/10/2007 7:48 AM	Rate (0)
azrael Posts: 45 Rating: (4)	thanks...
azrael Posts: 45 Rating: (4)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on